 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - High-Consistency Elastomers
Details: MED-4174 - Uncatalyzed
| Product Profile: | MED-4174P.pdf |
|---|---|
| MSDS PDF A: | MED4174M.pdf |
| MSDS PDF B: | - - |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | High-Consistency Elastomers |
| NuSil ID: | MED-4174 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Peroxide |
| Solids Content: | 100 |
| Work Time: | |
| Cure Time/Temp: | 5 M / 116 |
| Post Cure Time/Temp: | 4 H / 205 |
| Specific Gravity: | 1.15 |
| Durometer Type A Certified: | 45-55 |
| Durometer Type A Typical: | 50 |
| Tensile psi Certified: | 1 000 (6.9) |
| Tensile psi Typical: | 1 200 (8.3) |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | |
| Elongation Percent Certified: | 550 |
| Elongation Percent Typical: | 775 |
| Tear PPI Certified: | 175 (30.7) |
| Tear PPI Typical: | 225 (39.7) |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | 105 |
| Stress Strain: | 325 (2.2) @ 200 |
| Mix Ratio: | 1 part |
| Colour: | |
| Comments: | Uncatalyzed |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
