 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Unrestricted - Dispersions
Details: MED-2214 - One Part In Xylene
| Product Profile: | MED-2214P.pdf |
|---|---|
| MSDS PDF A: | MED2214M.pdf |
| MSDS PDF B: | |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Unrestricted |
| Description: | Dispersions |
| NuSil ID: | MED-2214 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Platinum Addition |
| Solids Content: | 35 |
| Work Time: | |
| Cure Time/Temp: | *1 |
| Post Cure Time/Temp: | |
| Specific Gravity: | |
| Durometer Type A Certified: | 31-45 |
| Durometer Type A Typical: | 35 |
| Tensile psi Certified: | |
| Tensile psi Typical: | |
| Tensile MPa Certified: | 1 200 (8.3) |
| Tensile MPa Typical: | 1 800 (12.4) |
| Elongation Percent Certified: | 700 |
| Elongation Percent Typical: | 800 |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | 100 ( |
| Tear kN/m Typical: | 185 ( |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | 3.5 k |
| Stress Strain: | 150 (1.0) @ 200 |
| Mix Ratio: | 1 part |
| Colour: | |
| Comments: | One Part In Xylene |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
