 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - Low-Consistency Elastomers
Details: MED4-4220 - Low Viscosity
| Product Profile: | MED4-4220P.pdf |
|---|---|
| MSDS PDF A: | MED44220AM.pdf |
| MSDS PDF B: | MED44220B.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Low-Consistency Elastomers |
| NuSil ID: | MED4-4220 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Platinum Addition |
| Solids Content: | 100 |
| Work Time: | |
| Cure Time/Temp: | 15 M / 150 |
| Post Cure Time/Temp: | - |
| Specific Gravity: | |
| Durometer Type A Certified: | - |
| Durometer Type A Typical: | 17 |
| Tensile psi Certified: | |
| Tensile psi Typical: | |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 625 (4.3) |
| Elongation Percent Certified: | - |
| Elongation Percent Typical: | 575 |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | 30 (5 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | A:20 k / B:15 k |
| Stress Strain: | 100 (0.7) @ 200 |
| Mix Ratio: | 1:1 |
| Colour: | |
| Comments: | Low Viscosity |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
