 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - High-Consistency Elastomers
Details: MED4-4115 - High consistency silicone elastomer
| Product Profile: | MED4-4115.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusimed4-4115.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | High-Consistency Elastomers |
| NuSil ID: | MED4-4115 |
| Cure System: | Peroxide |
| Cure Time/Temp: | 5 M / 116 |
| Post Cure Time/Temp: | 2 H / 249 |
| Specific Gravity: | 1.15 |
| Durometer Type A Typical: | 50 |
| Tensile psi Typical: | 1600 |
| Tensile MPa Typical: | 11.3 |
| Elongation Percent Typical: | 500 |
| Tear PPI Typical: | 100 |
| Tear kN/m Typical: | 17.6 |
| Plasticity/Viscosity/Extrusion Typical: | 90 |
| Mix Ratio: | 1 part |
| Colour: | Trans |
| Comments: | High consistency silicone elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
