 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Primer
Details: CF2-137 - Clear primer, UV indicator for platinum-cured systems. One-component, Air-drying
| Product Profile: | CF2-137.pdf |
|---|---|
| MSDS PDF A: | CF2-137_EU_English Ver 4.0.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Primer |
| NuSil ID: | CF2-137 |
| Flow/Viscosity: | - - |
| Cure System: | - - |
| Solids Content: | - - |
| Work Time: | - - |
| Cure Time/Temp: | - - |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 0.77 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | - - |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | - - |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | - - |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | - - |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Lap Shear psi/Mpa: | - - |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1 Part |
| Colour: | Trans |
| Comments: | Clear primer, UV indicator for platinum-cured systems. One-component, Air-drying |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
