 |
Back |
For full Warranty details please refer to the product profile!
Electronic Packaging Material - Potting and Encapsulating Materials
Details: EPM-2410 - Ideal for Static Mix and Dispense Applications Tack Free Within 8h at RTV
| Product Profile: | EPM-2410P.pdf |
|---|---|
| MSDS PDF A: | EPM2410A.pdf |
| MSDS PDF B: | EPM2410B.pdf |
Basic Product Overview: |
|
| Section: | Electronic Packaging Material |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | EPM-2410 |
| Flow/Viscosity: | A:62,000 / B:40,000 |
| Cure System: | Platinum Addition |
| Work Time: | 30 M |
| Cure Time/Temp: | 15 m / 150 |
| Durometer Type A Typical: | 30 |
| Tensile psi Typical: | 750 |
| Tensile MPa Typical: | 5.2 |
| Elongation Percent Typical: | 350 |
| Volume Resistivity** ohm·cm | 1 x 10<sup>15</sup> |
| Operating Temp: | -115 to 265 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Ideal for Static Mix and Dispense Applications Tack Free Within 8h at RTV |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
