 |
Back |
For full Warranty details please refer to the product profile!
Electronic Packaging Material - Static Dissapative
Details: EPM-2461 - Two-part, static dissapative silicone
| Product Profile: | EPM-2461.pdf |
|---|---|
| MSDS PDF A: | EPM-2461_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Electronic Packaging Material |
| Description: | Static Dissapative |
| NuSil ID: | EPM-2461 |
| Flow/Viscosity: | A:1,250,000 / B:100,000 |
| Cure System: | Platinum Addition |
| Solids Content: | - - |
| Work Time: | 1 h |
| Cure Time/Temp: | 1 D / R.T. |
| Durometer Type A Typical: | 30 |
| Tensile psi Typical: | 500 |
| Tensile MPa Typical: | 3.4 |
| Elongation Percent Typical: | 350 |
| Tear PPI Typical: | 30 |
| Ionic Content* CI - K / Na ppm | <5 / <1 / <6 |
| Volume Resistivity** ohm·cm | 535 |
| Operating Temp: | -50 to 250 |
| Mix Ratio: | 1:1 |
| Colour: | Black |
| Comments: | Two-part, static dissapative silicone |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
