 |
Back |
For full Warranty details please refer to the product profile!
Electronic Packaging Material - Thermal Interface Materials (TIMs)
Details: EPM-2462 - Electrically Conductive - Excellent Adhesion to Aluminum
| Product Profile: | EPM-2462.pdf |
|---|---|
| MSDS PDF A: | EPM-2462_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Electronic Packaging Material |
| Description: | Thermal Interface Materials (TIMs) |
| NuSil ID: | EPM-2462 |
| Flow/Viscosity: | Paste |
| Cure System: | Platinum Addition |
| Work Time: | 2.75 HR |
| Cure Time/Temp: | 30 m / 150 |
| Specific Gravity: | 3.39 |
| Durometer Type A Typical: | 85 |
| Tensile psi Typical: | 525 |
| Tensile MPa Typical: | 3.6 |
| Ionic Content* CI - K / Na ppm | <5 / <7 / <5 |
| Volume Resistivity** ohm·cm | 0.005 |
| Operating Temp: | -50 to 250 |
| Mix Ratio: | 20:1 |
| Colour: | Tan |
| Comments: | Electrically Conductive - Excellent Adhesion to Aluminum |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
