 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Fluorosilicone Adhesive and Sealant
Details: FS-3511 - Excellent for molding at rapid rates
| Product Profile: | FS-3511.pdf |
|---|---|
| MSDS PDF A: | FS-3511_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Fluorosilicone Adhesive and Sealant |
| NuSil ID: | FS-3511 |
| Cure System: | Platinum Cure |
| Work Time: | > 24 HR |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 1.39 |
| Durometer Type A Typical: | 40 |
| Tensile psi Typical: | 1,150 |
| Tensile MPa Typical: | 7.9 |
| Elongation Percent Typical: | 335 |
| Tear PPI Typical: | 60 |
| Tear kN/m Typical: | 10.6 |
| Operating Temp: | -65 to 250 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Excellent for molding at rapid rates |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
